Cyclone Ultra Blade
![](https://diamaxinc.com/wp-content/uploads/2022/12/CUCS16_Y9A6378-1-scaled.jpg)
![](https://diamaxinc.com/wp-content/uploads/2022/12/CUCS16__Y9A6348-scaled.jpg)
![](https://diamaxinc.com/wp-content/uploads/2022/12/CUCS16_Y9A6378-1-scaled.jpg)
![](https://diamaxinc.com/wp-content/uploads/2022/12/CUCS16__Y9A6348-scaled.jpg)
TOOLS CAN BE USED ON
Bridge Saw
![](https://diamaxinc.com/wp-content/uploads/2018/05/6-1.png)
![](https://diamaxinc.com/wp-content/uploads/2018/05/8.png)
![](https://diamaxinc.com/wp-content/uploads/2018/05/5.png)
MATERIAL
Dekton, Neolith, Techlam, Laminam, Lapitec, all UCS materials Quartz, Marble, Quartzite.
USE
Wet only
- Minimal upkeep; limited dressing
- Excellent finish for straight AND miter cuts
- Silent steel core for noise reduction and cutting efficiency
- Precision factory dressing and diamond bonding for minimal load while cutting
- Donatoni & Denver pin holes standard
ITEM # | SIZE | ARBOR | SEGMENT | RPM | *STRAIGHT | *MITER |
---|---|---|---|---|---|---|
CUCS14 | 14″ | 60 / 50 mm | 10 mm | 2,000 | 35”- 70” / min | 30” – 12” / min |
CUCS16 | 16″ | 60 / 50 mm | 10 mm | 2,000 | 35”- 70” / min | 30” – 12” / min |
CUCS18 | 18″ | 60 / 50 mm | 10 mm | 1,800 | 35”- 70” / min | 30” – 12” / min |
*Suggested feed rates.
Recommended for You